Ni 9205 Pinout. NI 9205 ANALOG INPUT MODULE NI Community Each NI 9205 is marked II 3G and is suitable for use in Zone 2 hazardous locations, in ambient temperatures of -40 °C ≤ Ta ≤ 70 °C Provides support for Ethernet, GPIB, serial, USB, and other types of instruments
NI 9205 16 AI Differential/32 AI SingleEnded, ±200 mV to ±10 V, 16 Bit from www.techsquare.co.th
Page 32: Electromagnetic Compatibility 2006/95/EC; Low-Voltage Directive (safety) • 2004/108/EC; Electromagnetic Compatibility Directive (EMC) Refer to the Declaration of Conformity (DoC) for Note this product for any additional regulatory compliance. The NI 9205 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 03 ATEX 0324020X and is IECEx UL 14.0089X certified
NI 9205 16 AI Differential/32 AI SingleEnded, ±200 mV to ±10 V, 16 Bit
The NI 9205 with spring terminal has a 36-terminal detachable spring-terminal connector, and the NI 9205 with DSUB has a 37-pin DSUB connector The NI 9205 is rated for 1,000 Vrms transient overvoltage protection. NI 9205 with spring terminal 158 g (5.8 oz) NI 9205 with DSUB 148 g (5.3 oz) Safety Voltages Connect only voltages that are within the following limits: Maximum voltage5 Channel-to-COM ±30 V DC NI 9205 with Spring Terminal Isolation Voltages Channel-to-channel None Channel-to-earth ground Continuous 250 V RMS, Measurement Category II Withstand
NI 9205 Datasheet DigiKey. Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports. NI 9205 with spring terminal 158 g (5.8 oz) NI 9205 with DSUB 148 g (5.3 oz) Safety Voltages Connect only voltages that are within the following limits: Maximum voltage5 Channel-to-COM ±30 V DC NI 9205 with Spring Terminal Isolation Voltages Channel-to-channel None Channel-to-earth ground Continuous 250 V RMS, Measurement Category II Withstand
NATIONAL INSTRUMENTS NI 9205 with DSUB DAQ C Series Voltage Input. Each analog input channel has an AI terminal or pin to which you can connect an analog output device Use the NI 9940 backshell for the NI 9205 with spring terminal and a 37-pin shielded cable or the NI 9933 backshell for the NI 9205 with DSUB